BMW S 1000XR, Rider'S Manual, Page: 57 / 237

NOTICE
You have the option of deactiv-
ating the DTC function while the
motorcycle is on the move.
Press and hold down button 1
until DTC telltale light 2
changes status.
DTC telltale light starts to
show.
Release button 1 within two
seconds.
DTC telltale light remains
on.
DTC is switched off.
DTC Switching on
Press and hold button 1 until
DTC indicator light 2 changes
status.
DTC telltale light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
DTC telltale light remains
off or continues to flash.
DTC is switched on.
If the coding plug is not inser-
ted, you have the alternative of
switching the ignition off and
then on again.
A DTC fault has oc-
curred if the DTC telltale
light shows when the motor-
cycle accelerates to a speed
in excess of the minimum
stated below after the igni-
tion was switched off and then
on again.
min 10 km/h
Electronic Suspension
Adjustment (ESA)
with Dynamic ESA OE
Adjusting the chassis and
suspension
Switching on ignition ( 38).
In the multifunction display the
spring preload is shown in area
1
and the damping in area 2 .
4
55
z Operation