BMW S 1000XR 2018 Rider'S Manual Download

Page: 55 / 241

Clock

Setting clock

Requirement

The motorcycle is stopped.

Switch on ignition.

Briefly press INFO

repeatedly

until

SETUP MENU ENTER

displayed.
Press and hold INFO

The

SETUP MENU

is opened.

Briefly press INFO

repeat-

edly until

SETUP EQUIPMENT

ENTER

is displayed.

Press and hold INFO

The

SETUP EQUIPMENT

is opened.
Briefly press INFO

repeat-

edly until

SETUP EQIP:CLOCK

TIME

is displayed.

Press and hold INFO

Minutes

flash.

Briefly press TRIP

to in-

crease minutes.
Briefly press INFO

to reduce

minutes.
When the minutes have been
set as desired, press and hold
INFO

Hours

flash.

Briefly press TRIP

to in-

crease hours.
Briefly press INFO

to reduce

hours.
When the hours have been
set as desired, press and hold
INFO

The hours no longer flash.
The clock is now set.

Antilock Braking
System (ABS)

Deactivate ABS

Switch on the ignition.

NOTICE

The ABS function can also be
deactivated while driving.

Press and hold the

button

until first the ASC/DTC indica-
tor light

and then the ABS

indicator and warning light

change their display behavior.

Operation

Summary of Contents for S 1000XR 2018


















































































































































































































































Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands

BMW S 1000XR 2018, Rider'S Manual

Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands