BMW S 1000XR 2018, Rider'S Manual

Page: 37 / 241

Possible cause:
ASC self-diagnosis rou-
tine not completed
The ASC function is not
available, as the self-diagnosis
function has not been
completed. (To check wheel
speed sensors, motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.
ASC switched off
ASC indicator and warning
light lights up.
Possible cause:
The ASC system has been deac-
tivated by the rider.
Switch on ASC ( 55).
ASC error
ASC indicator and warning
light lights up.
Possible cause:
The ASC control unit has de-
tected an error.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able at all or is restricted. You
should also take account of the
additional information on situa-
tions that can lead to an ASC
fault (
115).
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Dealer.
DTC intervention
with Dynamic Traction Control
(DTC)
OE
DTC indicator light flashes
rapidly.
DTC has detected instability at
the rear wheel and responded by
reducing the torque. The warn-
ing light flashes longer than the
DTC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
DTC self-diagnosis not
completed
with Dynamic Traction Control
(DTC)
OE
DTC indicator light flashes
slowly.
3
35
z Displays