BMW S 1000XR 2018, Rider'S Manual

Page: 111 / 241

Display duration for last
stopped time
Adjustment of the display dura-
tion in seconds.
After the start of a new lap, the
measured lap time of the previ-
ous lap is displayed for the
HOLD
set time. Then the running time
of the current lap is shown again.
Reading display range
OFF, 5, 10, 15, … 30
Factory setting: 5
Anti-rebound time for
starting a new lap
When determining the lap times,
the time can be set which must
elapse after the first received sig-
nal before a new signal is ac-
cepted.
Within this anti-rebound time,
the headlight flasher can be
used without the signal for a
new lap being output.
When an infrared receiver is
used, this prevents the signals
of several transmitters posi-
tioned next to each other from
being evaluated.
Reading display range
OFF, 10, 30, 45, 60
Factory setting: 10
LAP TIMER trigger mode
The various possibilities for start-
ing time recording are set.
Reading display range
AUTO, EXTERN, MANUAL
Factory setting: AUTO
AUTO: Both the headlight
flasher button and the lap trig-
ger are accepted as a trigger
source.
EXTERN: Only the lap trigger is
accepted as a trigger source.
7
109
z On the racetrack