BMW S 1000R 2015, Rider'S Manual

Page: 83 / 207

Hold the motorcycle upright,
preferably with the assistance
of a second person (do not
prop the motorcycle on the
side stand).
Measure distance
D between
bottom edge 1 of the slider
tube and front axle 2 .
Apply the rider's weight to the
motorcycle.
With the assistance of a
second person, measure
distance
D between points 1
and 2 again and calculate the
difference (negative spring
displacement) between the two
readings.
Load-dependent adjust-
ment of spring preload
Negative spring displacement
of front wheel
6...10 mm (With rider 85 kg)
WARNING
Spring preload setting and
spring-strut damping setting
not matched.
Impaired handling.
Adjust spring-strut damping to
suit spring preload.
To reduce negative spring dis-
placement (increase spring pre-
load, in other words), use the
tool from the on-board toolkit
to turn adjusting screws
1 in
direction A .
To increase negative spring
displacement (reduce spring
preload, in other words),
use the tool from the on-
board toolkit to turn adjusting
screws
3 in direction B .
Damping
Correct setting for the
damping characteristic
Damping must be adapted to suit
the surface on which the motor-
cycle is ridden and to suit spring
preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
5
81
z On the race track
ProCarManuals.com