BMW S 1000R 2015, Rider'S Manual

Page: 35 / 207

Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS switched off
ABS telltale and warning
light shows.
Possible cause:
The rider has switched off the
ABS system.
Switch on the ABS function
(
51).
ABS fault
ABS telltale and warning
light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available or the functionality
is subject to certain restrictions.
You can continue to ride the
vehicle, but make due provi-
sion for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault (
112).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC intervention
ASC telltale and warning
light quick-flashes.
The ASC control unit has detec-
ted a degree of instability at the
rear wheel and has intervened to
reduce torque. The warning light
flashes for longer than ASC in-
tervention lasts. This affords the
rider visual feedback on control
intervention even after the critical
situation has been dealt with.
ASC self-diagnosis not
completed
ASC telltale and warning
light slow-flashes.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed with the en-
gine running for the wheel-
speed sensors to be checked:
min 5 km/h)
3
33
z Status indicators
ProCarManuals.com