BMW S 1000 RR - 2010 Rider'S Manual Download Page 38

Page: 38 / 178

Ignition switch and
steering lock

Keys

You receive two master keys and
one spare key. If a key is lost,
please note the information on
the electronic immobilizer (EWS)
(

37).

Ignition key and steering lock,
tank cap and seat lock are all op-
erated with the same key.

Switching on ignition

Turn key to position

Parking lights and all function
circuits switched on.
Engine can be started.
Pre-ride check is performed.
(

60)

with BMW Motorrad Race
ABS

ABS self-diagnosis is
performed. (

61)

with BMW Motorrad Race ABS
and DTC

DTC self-diagnosis is per-
formed. (

61)

Switching off ignition

Turn key to position

Light switched off.
Handlebars not locked.
Key can be removed.

Locking handlebars

Turn handlebars to left.

Turn key to position

while

moving handlebars slightly.
Ignition, lights and all function
circuits switched off.
Handlebars locked.
Key can be removed.

Operation

Summary of Contents for S 1000 RR - 2010



















































































































































































Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Brands by name

Popular brands

BMW S 1000 RR - 2010, Rider'S Manual

Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Brands by name

Popular brands