BMW S 1000 RR - 2010, Rider'S Manual

Page: 108 / 178

General instructions
The 'Maintenance' chapter de-
scribes work involving the check-
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional main-
tenance and repair work is pro-
vided in the Repair Manual for
your motorcycle on DVD, which
you can obtain from your autho-
rized BMW Motorrad retailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult a certified work-
shop, preferably your authorized
BMW Motorrad retailer.
Onboard toolkit
1 Spare fuses with gripper
Miniature fuses, 4 A and
7.5 A
2 Box wrench
Wrench size: 34 mm
Adjusting chain tension
(
118).
3 Socket wrench
Wrench size: 17 mm
Adjusting spring preload
on front wheel (
46).
Adjusting compression
damping for rear wheel
(
50).
use plastic attachment
for adjusting damping
and spring preload
Extension for hook
wrench
4 TORX wrench, T25
Removing and installing
body panels
5 Hook wrench
Adjusting spring preload
for rear wheel (
47).
6 Extension for screwdriver
insert
Adjusting rear damping
(in conjunction with slot-
ted blade)
9
106
z Maintenance