BMW R nineT 2020, Rider'S Manual

Page: 90 / 221

84 RIDING
Phase 1
All the segments in displays 1
light up.
At the same time, all the indic-
ator and warning lights 3 are
switched on.
Phase 2
'General' warning light 2
changes from ON to flashing.
The needle 4 for the speed
indicator moves to maximum
speed.
Rev. counter needle 5 swings
to the maximum rpm position.
Phase 3
Speedometer needle 4 moves
to the zero position.
Rev. counter needle 5 moves
to the zero position.
The indicator and warning
lights go out or assume opera-
tional status, as applicable.
The malfunction indicator lamp
(MIL) does not go out until
15 seconds have elapsed.
The display switches to its or-
dinary display mode. The on-
board computer readings ap-
pear on the display.
If the needles did not move, an
indicator or warning light did
not show or segments in the
display failed to light up:
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.
ABS self-diagnosis
BMW Motorrad ABS performs
self-diagnosis to ensure its op-
erability. Self-diagnosis starts
automatically when you switch
on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
flashes.