BMW R nineT 2020, Rider'S Manual

Page: 77 / 221

71
Adjusting rebound-stage
damping for front wheel
Adjust rebound-stage
damping by turning adjusting
screw 1 on the right fork leg.
To increase damping: Use the
tool from the on-board toolkit
to turn the adjusting screw so
that mark 1 points to a higher
value on the scale.
To reduce damping: Use the
tool from the on-board toolkit
to turn the adjusting screw so
that mark 1 points to a lower
value on the scale.
Rebound stage, basic
setting, front
Position 1 (comfortable set-
ting with rider 85 kg)
Position 3 (normal setting
with rider 85 kg)
Position 7 (sports setting
with rider 85 kg)
Factory default settings, front
wheel
Reset the factory defaults as
stated below.
Factory default settings
for compression/re-
bound stages, front
Position 3
Adjusting damping for rear
wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.