BMW R nineT 2020, Rider'S Manual

Page: 49 / 221

43
If the ambient brightness de-
creases below a certain value
(e.g. in a tunnel) while the
daytime riding light function
is active, the low-beam head-
light is automatically switched
on. When sufficient ambi-
ent brightness is detected,
the daytime riding light is
switched back on.
HAZARD WARNING LIGHTS
Operating hazard warning
flashers
The hazard warning flash-
ers place a strain on the
battery. Do not use the haz-
ard warning flashers for longer
than absolutely necessary.
If you press a turn-indic-
ator button while the haz-
ard warning lights are switched
on, the turn-indicator function
is activated instead of the haz-
ard warning flashers and re-
mains active until you release
the button. The hazard warn-
ing flashers recommence flash-
ing as soon as the button is
released.
Switch on the ignition ( 38).
Press button 1 to switch on
the hazard warning lights sys-
tem.
Ignition can be switched off.
To switch off the hazard
warning flashers, switch
on the ignition and press
button 1 again.
TURN INDICATORS
Operating turn indicators
Switch on the ignition ( 38).
Push button 1 to the left to
switch on the left turn indicat-
ors.
Push button 1 to the right to
switch on the right turn indic-
ators.