BMW R nineT 2020, Rider'S Manual, Page: 147 / 221

141
Connection of electrical
devices
You can start using electrical
devices connected to the USB
charging sockets only when the
ignition is switched on. The
power supply to the sockets
is switched off no more than
15 minutes after the ignition is
switched off, in order to pre-
vent overloading of the on-
board electrics.
While riding in the rain, you
should disconnect the device
from the interface in order to
protect against damage.
To prevent dirtying, keep the
protective cover closed when
no device is connected.
Cable routing
Note the following with regard
to the routing of cables from
USB charging sockets to items
of electronic equipment:
Make sure that cables do not
impede the rider.
Make sure that cables do not
restrict the steering angle or
obstruct handling.
Make sure that cables cannot
be trapped.
LUGGAGE
Securing luggage to
motorcycle
WARNING
Handling adversely affected
by overloading and imbal-
anced loads
Risk of falling
Do not exceed the permiss-
ible gross weight and be
sure to comply with the in-
structions on loading.
Secure luggage (e.g. rear
softbag) to lashing eyes 1 .
Note the maximum payload.
Payload of rear softbag
with rear softbag OA
max 10 kg
You can obtain additional in-
formation on luggage systems
and how to secure them cor-
rectly from your authorised
BMW Motorrad retailer.