BMW R nineT 2015, Rider'S Manual

Page: 97 / 157

Charging connected
battery
Remove devices connected to
onboard power sockets.
ATTENTION
Charging of the connected
battery on the battery termi-
nals.
Damage to the motorcycle's
electronics.
Disconnect the battery be-
fore charging on the battery
terminals.
ATTENTION
Unsuitable chargers con-
nected to the power socket.
Damage to charger and chassis
electronics.
Use suitable BMW chargers.
The correct charger is avail-
able through your authorized
BMW Motorrad retailer.
ATTENTION
Charge a fully discharged
battery via the power socket
or additional socket.
Damage to the motorcycle's
electronics.
Always charge a fully
discharged battery (battery
voltage below 9 V; with
the ignition switched on,
the indicator lights and the
multifunction display remain
off) directly at the poles of the
disconnected battery.
Charge disconnected battery
via onboard socket.
NOTICE
The motorcycle's onboard elec-
tronics know when the battery
is fully charged. The onboard
socket is switched off when this
happens.
Comply with operating instruc-
tions of charger.
NOTICE
If you are unable to charge the
battery via the onboard socket,
you may be using a charger that
is not compatible with your mo-
torcycle's electronics. In this
case, charge the battery directly
at the terminals of the discon-
nected battery.
Charging disconnected
battery
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once the battery is fully
charged, disconnect the
charger's terminal clips from
the battery terminals.
8
95
z Maintenance
ProCarManuals.com