BMW R 1250RS, Rider'S Manual, Page: 82 / 279

Possible ABS system status
ON
is displayed.
Release button 1 after the ABS
system status changes over.
ABS indicator and warning
light remains off or contin-
ues to flash.
The ASC⁄DTC system status
remains unchanged and a new
ABS system status
ON
is briefly
displayed.
The ABS function is switched
on.
You also have the option of
switching the ignition off and
then on again.
An ABS fault has oc-
curred if the ABS indic-
ator and warning light shows
when the motorcycle accel-
erates to a speed in excess
of the minimum stated below
after the ignition was switched
off and then on again.
min 10 km/h
Traction control (ASC/
DTC)
Switch off the ASC/DTC
function
Switching on ignition ( 64).
NOTICE
You have the option of deactivat-
ing the ASC/DTC function while
the motorcycle is on the move.
Press and hold button 1 until
the ASC/DTC indicator and
warning light changes its
display behaviour.
Immediately after button 1 is
pressed, ASC/DTC system
status
ON
and current ABS
system status are displayed.
ASC/DTC indicator and
warning light comes on.
Possible ASC/DTC system
status
OFF!
is displayed.
Release button 1 after the
ASC/DTC system status
changes.
4
80
z Operation