BMW R 1250RS, Rider'S Manual

Page: 185 / 279

WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
Operate the brake several
times until the brake pads are
bedded.
Seat the cable for the wheel
speed sensor in holding clip
3 .
Insert the wheel speed sensor
into the bore hole and install
bolt
1 .
Wheel-speed sensor to
fork leg
Joining compound: Micro-
encapsulated or medium-
strength thread-locking com-
pound
8 Nm
Removing rear wheel
Removing silencer ( 184).
Engage first gear.
Remove studs
1 from the rear
wheel, while supporting the
wheel.
Roll the rear wheel out toward
the rear.
Installing the rear wheel
WARNING
Use of a non-standard wheel
Malfunctions during ABS and
ASC/DTC intervention
See the information on the ef-
fect of wheel size on the ABS
and ASC/DTC systems at the
start of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Seat the rear wheel on the
rear-wheel adapter.
9
183
z Maintenance