BMW R 1250RS Page 145 Rider'S Manual Download

Page: 145 / 279

Recommended fuel
grade

Super unleaded (max
15 % ethanol, E0/E5/
E10/E15)
95 ROZ/RON
90 AKI

Alternative fuel grade

Normal unleaded (power-
and consumption-related
restrictions.) (max 15 %
ethanol, E0/E5/E10/E15)
91 ROZ/RON
87 AKI

Pay attention to the following
symbols in the fuel filler cap
and on the fuel pump:

After refuelling with fuels of
poor-quality, sporadic knocking
noises may be perceptible.

Refuelling

WARNING

Fuel is highly flammable

Risk of fire and explosion

Do not smoke. Never bring
a naked flame near the fuel
tank.

WARNING

Escape of fuel due to heat-
induced expansion if fuel
tank is overfilled

Risk of falling

Do not overfill the fuel tank.

ATTENTION

Wetting of plastic surfaces
by fuel

Damage to the surfaces (surfaces
become unsightly or dull)

Clean plastic surfaces immedi-
ately after contact with fuel.
Make sure the ground is level
and firm and place the motor-
cycle on its side stand.

Open the protective cap

Unlock the fuel tank cap by
turning the ignition key

clockwise and open up.

143

Riding

Summary of Contents for R 1250RS
























































































































































































































































































Search results

Summary of Contents for R 1250RS

Reviews:

Related manuals for R 1250RS

Brands by name

Popular brands

BMW R 1250RS, Rider'S Manual

Search results

Summary of Contents for R 1250RS

Reviews:

Related manuals for R 1250RS

Brands by name

Popular brands