BMW R 1200RT 2016, Rider'S Manual

Page: 63 / 229

Resetting trip odometer
Switch on the ignition.
Select desired tripmeter.
Press Multi-Controller 1 to
right and hold until tripmeter 2
has been reset.
Automatic Stability
Control (ASC)
Switching ASC function
off and on
Switch on the ignition.
Call up the
Settings
menu
and select the
ASC
menu
item.
NOTICE
This menu cannot be called up
while the motorcycle is on the
move.
Select
Off (once)
to
switch off the ASC until
the next time the ignition is
switched on.
When the ASC is switched
off, the ASC indicator and
warning light lights up.
Select
On
to switch the ASC
on. Alternate method: Switch
the ignition off and then on.
ASC indicator and warning
light goes out; if the self-
diagnosis routine has not been
completed, the ASC indicator
and warning light begins to flash.
Electronic suspension
adjustment (ESA)
with Dynamic ESA
OE
Dynamic ESA range of
adjustment
Using the Dynamic ESA elec-
tronic suspension adjustment
system you can easily adjust your
motorcycle to the load being car-
ried.
Using leveling sensors, Dynamic
ESA detects movements of the
running gear and responds to
them by adjusting the damper
valves. As a result, the running
gear is adjusted to the conditions
of the ground.
In addition, the damping char-
acteristic can be made harder
4
61
z Operation
ProCarManuals.com