BMW R 1200GS 2016, Rider'S Manual

Page: 144 / 243

control units can be adapted for
the new wheel sizes.
TPC/RDC sticker
with Tire Pressure Monitor
(TPM)
OE
ATTENTION
Improper tire removal
Damage to the TPC/RDC sen-
sors
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
authorized workshop of the TPC/
RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
Detach wheel speed sensor
lead from retaining clips
1
and 2 .
Remove screw 3 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
8
142
z Maintenance