BMW R 1200 RT 2011, Rider'S Manual

Page: 44 / 161

Set the clock only when the mo-
torcycle is stationary.
Switch on the ignition.
Press and hold down button 1
until the hours number 2
flashes.
Repeatedly press the button
until the hours number is cor-
rect.
Press and hold down the but-
ton until the minutes number
3
flashes.
Repeatedly press the button
until the minutes number is
correct.
Hold down the button until the
minutes number stops flashing.
This completes the process.
Reading
Selecting readings
Switch on the ignition.
without on-board computer
OE
Press button 1 to select the
reading in display area 2 .
The following values can be dis-
played:
Tripmeter 1 (
Trip I
)
Tripmeter 2 (
Trip II
)
Residual range (
RANGE
, once
fuel level is down to reserve)
with tyre pressure monitoring
(RDC)
OE
Tyre pressures (
RDC
)
with on-board computer OE
Press button 1 to select the
reading in display area 3 .
The following values can be dis-
played:
Tripmeter 1 (
Trip I
)
Tripmeter 2 (
Trip II
)
Total distance travelled
(
DIST
).
4
42
z Operation
ProCarManuals.com