BMW R 1200 RT - 2006, Rider'S Manual

Page: 38 / 194

ABS self-diagnosis not
completed
flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
lights up.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride the
vehicle, but make due provi-
sion for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault (
102).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC intervention
quick-flashes.
The ASC has detected a
degree of instability at the rear
wheel and has intervened to re-
duce torque. The warning light
flashes for longer than ASC in-
tervention lasts. This affords the
rider visual feedback on control
intervention even after the critical
situation has been dealt with.
ASC self-diagnosis not
completed
slow-flashes.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.
3
36
z Status indicators