BMW ONBOARD COMPUTER, Operating Instructions Manual

Page: 84 / 99

83 n
Overview
Navigation
Entertainment
Telephone
Computer
Keywords
The "Arrival" function displays the anti-
cipated time of arrival. The time of
arrival is calculated by the navigation
computer for the planned route and
selected route type, on the basis of
your average speed.
Conditions:
>
A value for the distance between the
starting point and destination must
have been entered manually before
the start of the journey via the "Dis-
tance" function, or
>
The destination guidance function of
the GPS navigation system must
have been started, see page
33 .
The time of arrival (based on the dis-
tance to destination and the calculated
route) is adopted automatically.
"Arrival" is purely a display func-
tion; the value that is shown is ex-
pressed in the form that is selected un-
der "Set", see page
19 .
<
The display appears at the top
right of the full screen, see
page 15 .
In the split screen, it appears to the
right of the lower screen, but only while
destination guidance is active, see
page
33 .
<
You can have the average fuel con-
sumption displayed for two different
sections of a journey, e.g. for the entire
journey, for a particular section of the
route, or since you last refuelled. The
average fuel consumption is calculated
for the period since the engine was last
started.
To start the fuel consumption calcula-
tion, with the ignition key in position 1
or beyond:
1. Select "Consump. 1" or
"Consump. 2"
2. Select "Recalculate".
The recalculated average fuel
consumption is displayed.
You can obtain a display of the car's
average speed. The average speed is
calculated for the period since the
engine was last started.
To start the average speed calculation,
with the ignition key in position 1 or be-
yond:
1. Select "Avg. speed"
2. Select "Recalculate".
Arrival time Fuel consumption Average speed
Online Edition for Part No. 01 41 0 156 676 - © 01/02 BMW AG