BMW Motorrad IV, Owner'S Manual, Page: 9 / 52

BMW Motorrad Navigator IV Owner’s Manual 7
Getting Started
7. Tilt the Navigator IV back until it snaps
into place.
8. Plug the other end of the automotive
power cable into a power outlet in your
car.
9. If you are using a traffic receiver in
Europe, secure the antenna on the traffic
receiver to the windshield using the
suction cups.
NoTe:
The automotive power cable must
be used to charge the Navigator IV when
the unit is in the car mount.
Configuring Your Navigator
IV
Your unit should turn on automatically if it
is plugged in and your vehicle is running. To
manually turn on your Navigator IV, press
the Power key. Follow the on-screen
instructions.
Acquiring Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the
Navigator IV.
Acquiring satellite signals may take a few
minutes. The bars indicate GPS
satellite strength. When one bar is green,
the Navigator IV has acquired satellite
signals. Now you can select a destination and
navigate to it.
Using the Menu Page
➊
➋ ➌
➍
➏
➒ ➑
➐
➎
➓
➊
GPS satellite strength.
➋ Bluetooth
®
technology status.
➌
Touch to select motorcycle, scooter,
automobile, or pedestrian mode.
➍
Battery status.
➎ Current time. Touch to change settings.
➏
Touch to find a destination.
➐
Touch to view the map.
➑ Touch to make a call when connected to
a compatible mobile phone .
➒
Touch to adjust the volume.
➓
Touch to use the tools such as settings,
Where Am I?, Help, and routes.