manualshive.com logo in svg

BMW M3 SEDAN, Owner'S Manual, Page: 340 / 392

Share
Download
BMW M3 SEDAN Owner'S Manual Download Page 340

Engine compartment

Vehicle features and

options

This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are

not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.

Overview

1

Filler neck for washer fluid

2

Jump-starting, positive battery terminal

3

Engine coolant

4

Oil filler neck

5

Coolant, auxiliary cooling

6

Vehicle identification number

7

Jump-starting, negative battery terminal

Seite 340

MOBILITY

Engine compartment

340

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Reviews:

No comments