manualshive.com logo in svg

BMW M3 SEDAN, Owner'S Manual, Page: 169 / 392

Share
Download
BMW M3 SEDAN Owner'S Manual Download Page 169

5.

"Rotation"

6.

Turn the Controller until the desired setting is
selected.

7.

Press the Controller.

Visibility of the display

The visibility of the displays in the Head-up Dis‐
play is influenced by the following factors:

▷

Seat position.

▷

Objects on the cover of the Head-up Display.

▷

Sunglasses with certain polarization filters.

▷

Wet roads.

▷

Unfavorable light conditions.

If the image is distorted, have the basic settings
checked by a dealer’s service center or another
qualified service center or repair shop.

Special windshield

The windshield is part of the system.
The shape of the windshield makes it possible to
display a precise image.
A film in the windshield prevents double images
from being generated.
For this reason, it is strongly suggested to have
the special windshield replaced by a dealer’s
service center or another qualified service center
or repair shop, if necessary.

Shift point indicator

Concept

The shift lights indicate the upshift point at which
the best possible acceleration can be achieved.

General information

If the Head-up Display is switched on, the Shift
Lights will be displayed in the Head-up Display.
Shift lights are only shown in the Head-up Dis‐
play in the M view.

If the Head-up Display is switched off, the Shift
Lights are displayed in the instrument cluster.

Shift lights in the instrument

cluster

▷

Current engine speed is displayed in the
tachometer.

▷

Arrow 1: successive yellow illuminated fields
indicate the upcoming shift moment.

▷

Arrow 2: fields are illuminated in red. Do not
wait any further to shift.

When the maximum RPM is reached, the entire
display flashes. The fuel supply is reduced to
protect the engine.

Shift point indicator in the Head-

up Display

▷

Current engine speed is displayed in the
tachometer.

▷

Arrow 1: successive yellow illuminated fields
indicate the upcoming shift moment.

▷

Arrow 2: fields are illuminated in red. Do not
wait any further to shift.

Seite 169

Displays

CONTROLS

169

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Reviews:

No comments