manualshive.com logo in svg

BMW M3 SEDAN, Owner'S Manual, Page: 168 / 392

Share
Download
BMW M3 SEDAN Owner'S Manual Download Page 168

Display

Overview

The following information is displayed on the
Head-up Display:

▷

Vehicle speed.

▷

Navigation instructions.

▷

Check Control messages.

▷

Selection list in the instrument cluster.

▷

Driver assistance systems.

Some of this information is only displayed briefly
as needed.

Selecting displays in the Head-up
Display

1.

"CAR"

2.

"Settings"

3.

"Displays"

4.

"Head-up display"

5.

Select the desired setting.

The setting is stored for the driver profile cur‐
rently used.

Configuring the M MODE programs

Depending on the selected View mode, various
settings can be selected.

1.

"CAR"

2.

"Settings"

3.

"Displays"

4.

"Head-up display"

5.

"Configure view"

6.

Select the desired setting.

The setting is stored for the driver profile cur‐
rently used.

M view

In the M view, the displays on the Head-up Dis‐
play switch from the standard view to a more
sporty, M-specific view. The M View in the

Head-up Display is active in M MODE programs
SPORT and TRACK.

Setting the brightness

The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted manually.

1.

"CAR"

2.

"Settings"

3.

"Displays"

4.

"Head-up display"

5.

"Brightness"

6.

Turn the Controller until the desired bright‐
ness is set.

7.

Press the Controller.

When the low beams are switched on, the
brightness of the Head-up Display can be addi‐
tionally influenced using the instrument lighting.

Adjusting the height

1.

"CAR"

2.

"Settings"

3.

"Displays"

4.

"Head-up display"

5.

"Height"

6.

Turn the Controller until the desired height is
reached.

7.

Press the Controller.

The setting is stored for the driver profile cur‐
rently used.
The height of the Head-up Display can also be
stored using the memory function.

Setting the rotation

The Head-up Display view can be rotated.

1.

"CAR"

2.

"Settings"

3.

"Displays"

4.

"Head-up display"

Seite 168

CONTROLS

Displays

168

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Reviews:

No comments