BMW K 1600GT, Rider'S Manual

Page: 74 / 209

Installing seat
Connect plug 2 of the seat
heating.
Position the seat with
mounts
3 in rubber buffers 4
on left and right.
Lower the rear of the seat and
engage the seat in the latching
mechanism.
Windscreen
Adjusting windscreen
Switch on the ignition.
When you pull away the wind-
screen automatically returns to
the position it was in before the
ignition was switched off.
Press top section of button 1
to raise the windscreen.
Press bottom section of but-
ton
1 to lower the windscreen.
Switch off the ignition.
The windscreen automatically
moves to the bottom limit posi-
tion.
If the windscreen encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windscreen
is stopped and raised slightly.
After a delay of a few seconds
the windscreen again attempts
to move to the bottom limit
position.
There is no guarantee that the
pressure-sensitive finger guard
system will function correctly if a
windscreen that does not have
BMW approval is installed.
Under these circumstances:
Before switching off the igni-
tion always check that there is
nothing to obstruct movement
of the windscreen.
4
72
z Operation