BMW K 1600GT, Rider'S Manual

Page: 65 / 209

Select
Day run lights
from the menu and set
Auto. DRL
to
On
.
The symbol for the auto-
matic daytime riding light
shows in the display.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B.
in a tunnel). When sufficient
ambient brightness is detec-
ted, the daytime riding light is
switched back on. When the
daytime riding light is active,
the daytime riding light symbol
is displayed in the multifunction
display.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
NOTICE
The side lights place a strain on
the battery. Do not switch the
ignition on for longer than abso-
lutely necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
High-beam headlight and
headlight flasher
Push switch 1 forward to
switch on the high-beam
headlight.
Pull switch
1 back to operate
the headlight flasher.
NOTICE
The high-beam headlight can
also be switched on when the
engine is not running.
Parking light
Switch off the ignition.
4
63
z Operation