BMW K 1600GT, Rider'S Manual

Page: 63 / 209

Trip meter
Selecting the tripmeter
Switch on the ignition.
Press button 1 to select
the
Trip
menu and then
select tripmeter 2 of your
choice.
The following counters can be
displayed:
Tripmeter 1 (
Trip 1
)
Tripmeter 2 (
Trip 2
)
Automatic tripmeter (
Trip
Auto
) resets automatically
eight hours after ignition OFF.
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Push Multi-Controller 1 to the
right and hold it in this position
until tripmeter
2 is reset.
Daytime riding light
with daytime running light OE
Manual daytime riding
light
Precondition: automatic daytime
riding light is switched off.
WARNING
Activation of daytime riding
light in the dark.
Poorer vision and oncoming
traffic dazzled.
Do not use the daytime run-
ning light when it is dark.
NOTICE
By comparison with the low-
beam headlight, the daytime
running light makes the vehicle
more visible to oncoming traffic.
This improves daytime visibility.
Start the engine ( 94).
Call up the
Settings
menu
and select
Vehicle
.
Select
Day run lights
from the menu and set
Auto. DRL
to
Off
.
4
61
z Operation