BMW K 1600GT, Rider'S Manual

Page: 147 / 209

Installing rear wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and DTC.
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel into position
at the rear-wheel adapter and
attach it.
Fit five bolts 1 and tighten to
the specified torque in diagon-
ally opposite sequence.
Rear wheel to wheel
flange
Tightening sequence: tighten
in diagonally opposite se-
quence
60 Nm
Hold the number-plate carrier
in position.
Install screws
1 on left and
right.
Front-wheel stand
Installing front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without
also accompanying use of
centre stand or auxiliary
stand.
8
145
z Maintenance