BMW i wallbox, Installation Instructions Manual, Page: 19 / 40

EN-US
19
Removing the connector panel cover
Note
It is necessary to remove the connector panel cover only if the setting of the DIP switches
needs to be changed, or if the Wallbox is to be permanently connected to the power network.
1. Release the four screws with which the
connector panel cover 1 is mounted.
ESD
Risk of damage! Electronic components may be destroyed by being touched!
Before working with assemblies, carry out an electrical discharge by touching a metallic,
grounded object!
2. Remove the connector panel cover. The
connector panel 2 is now accessible.
WARNING
The cover of connection area 3 for the line voltage may be removed only by a trained
electrician.