BMW i wallbox, Installation Instructions Manual

Page: 10 / 40

10
WARNING
Grounding regulations
This product must be grounded. If a malfunction or outage occurs, then grounding provides
the electrical current with a path of least resistance, in order to reduce the risk of an electric
shock. This product is equipped with a cable which has a device grounding conductor and a
grounding plug. The plug must be inserted into a suitable outlet which is correctly installed and
grounded in compliance with all local regulations and requirements.
WARNING – Incorrect connection of the device grounding conductor can result in electric
shock. Consult a qualified electrician or service technician if you are not sure whether the
product is correctly grounded. Do not make any modifications to the plug supplied with
the product – if it does not fit the outlet, then have a suitable outlet installed by a qualified
electrician.
ATTENTION
Never clean the Wallbox using a water jet (garden hose, high pressure cleaner, etc.)!
Ensure that the Wallbox is not damaged by inappropriate handling (casing cover, internal
parts, etc.).
If it is raining or snowing, and the Wallbox is mounted outdoors, do not open the connector
panel cover!
Risk of breaking the plastic casing!
- Do not use countersunk screws for fastening!
- Do not tighten the attachment screws forcefully.
- The installation surface must be completely even (max. 1 mm difference between contact
and/or attachment points). The casing must not be bent.
Information for specialists who open the device:
Risk of damage! Electronic components may be destroyed by being touched!
Before working with assemblies, carry out an electrical discharge by touching a metallic,
grounded object!
Failure to comply with the safety instructions may result in danger to life, injuries, and damage to the
device! The manufacturer assumes no liability for claims resulting from this!