BMW G 650 GS - BROCHURE 2010, Rider'S Manual, Page: 83 / 135

Install rubber buffer 4 on left
and right in upper position.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align two mounts
2 so that
front forks rest securely on
them.
Tighten adjusting screws
1 .
If the motorcycle is raised
too far at the front the aux-
iliary stand will lift clear of the
ground and the motorcycle could
topple to one side.
When raising the motorcycle,
make sure that the auxiliary stand
remains on the ground. Adjust
the height of the front-wheel or
auxiliary stand if necessary.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
Fuses
Removing fuse
There is a danger of fire
if defective fuses are by-
passed.
Always replace defective fuses
with new fuses.
Switch off ignition.
Removing seat (
38).
Press together two locking
levers
1 and remove fuse cov-
er.
Pull defective fuse upward out
of fuse box.
8
81
z Maintenance