BMW F 800 R 2013, Rider'S Manual, Page: 41 / 145

Resetting average values
with on-board computer OE
Switch on the ignition.
Select average consumption or
average speed.
Press and hold down button 1
until the value shown is reset.
Stopwatch
with on-board computer OE
Stopwatch
You can switch from the odo-
meter reading to a stopwatch
3 .
The readout is in hours, minutes,
seconds and tenths of a second,
with dots as separators.
By swapping the functions of
button
2 and the INFO button
on the handlebar fitting you can
make the stopwatch easier to
use (as a lap timer) as you ride.
If you swap the functions in this
way the stopwatch and the odo-
meter are operated by means of
the INFO button and you must
use button 2 to operate the on-
board computer.
The stopwatch continues to time
in the background if you switch
back temporarily to the odometer
reading. Similarly, the stopwatch
continues timing if you temporar-
ily switch off the ignition.
Operating stopwatch
If necessary, use button 1 to
switch from the odometer to
the stopwatch.
4
39
z Operation
ProCarManuals.com