BMW F 750 GS, Rider'S Manual, Page: 49 / 348

43
This error message shows
briefly only after the Pre-
Ride-Check completes.
Possible cause:
The integral battery in the tyre-
pressure sensor has lost a sig-
nificant proportion of its ori-
ginal capacity. There is no as-
surance of how long the tyre
pressure monitoring system
can remain operational.
Consult a specialist work-
shop, preferably an authorised
BMW Motorrad retailer.
ABS self-diagnosis not
completed
flashes.
Possible cause:
The ABS function is not avail-
able, because self-diagnosis did
not complete. The motorcycle
has to move forward a few
metres for the wheel sensors
to be tested.
Pull away slowly. Bear in
mind that the ABS function
is not available until self-
diagnosis has completed.
ABS fault
lights up.
Possible cause:
The ABS Pro control unit has
detected a fault. The ABS Pro
function is not available. The
ABS function is available,
subject to restrictions. ABS
provides support only for
braking in straight-ahead
driving.
You can continue to ride.
Bear in mind the more
detailed information on
certain situations that can
lead to an ABS Pro fault
message ( 175).
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.
Possible cause:
The ABS control unit has de-
tected a fault.
You can continue to ride.
Bear in mind that the ABS
function is not available. Take
note of the more detailed
information on certain
situations that can lead to an
ABS fault message ( 175).
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.