BMW F 750 GS Page 242 Rider'S Manual Download

Page: 242 / 348

236

ACCESSORIES

Turn key

anti-clockwise and

withdraw.

Maximum payload and

maximum speed

Note the maximum payload

and the maximum permissible

speed.

Maximum speed for rid-

ing with a loaded top-

case
max 160 km/h

Payload of topcase

max 5 kg

NAVIGATION SYSTEM

with preparation for naviga-

tion system

Securing navigation device

Navigation prepara-

tion is suitable from

BMW Motorrad Navigator IV.

The latching system of

the Mount Cradle is not

designed to protect against

theft.

Always remove the navigation

system and stow it away safely

as soon as you finish your ride.

Turn ignition key

anti-clock-

wise.

Pull the lock retainer

to the

left

Press the lock

in.

Mount Cradle is unlocked and

cover

can be removed to

the front in a swivelling mo-

tion.

Insert the navigation device

at the bottom and swing it

towards the rear in one rota-

tional movement.

The navigation device en-

gages with an audible click.

Push the lock retainer

all

the way to the

right

Lock

is locked.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands