BMW F 700 GS 2012, Rider'S Manual

Page: 103 / 162

minimum permissible tread
depth.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Tyres have wear indicators
integrated into the main
tread grooves. The tyre is worn
out when the tyre tread has worn
down to the level of the marks.
The locations of the marks are
indicated on the edge of the tyre,
e.g. by the letters TI, TWI or by
an arrow.
If the tyre tread is worn to min-
imum:
Replace tyre or tyres, as applic-
able.
Chain
Lubricating chain
Dirt, dust and inadequate
lubrication will result in ac-
celerated wear and significantly
shorten the drive chain's useful
life.
Clean and lubricate the drive
chain at regular intervals.
Lubricate the drive chain every
1000 km at the latest. Lubric-
ate the chain more frequently if
the motorcycle is ridden in wet,
dusty or dirty conditions.
Switch the ignition off and se-
lect neutral.
Clean the drive chain with a
suitable cleaning product, dry it
and apply chain lubricant.
Wipe off excess lubricant.
Checking chain sag
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the rear wheel until it
reaches the position with the
lowest amount of chain sag.
Use a screwdriver to push the
chain up and down and meas-
ure difference
A .
8
101
z Maintenance
ProCarManuals.com