BMW F 700 GS 2012 Rider'S Manual Download Page 101

Page: 101 / 162

Coolant, specified level

Antifreeze
between MIN and MAX
marks on the expansion tank

If the coolant drops below the
permitted level:

Top up the coolant.

Topping up coolant

Open cap

of the expansion

tank.
Using a suitable funnel, top up
with coolant until the level is
correct.
Close the cap of the expansion
tank.

Clutch

Checking clutch operation

Pull the clutch lever.
The pressure point must be
clearly perceptible.

If the pressure point is not clearly
perceptible:

Have the clutch checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Check the clutch play

Turn the handlebars all the way
to left

Operate the clutch lever until
resistance can be felt whilst
observing the notch

in the

manual valve.
The edge

of the brake cable

socket should be able to move

Maintenance

ProCarManuals.com

Summary of Contents for F 700 GS 2012



































































































































































Search results

Summary of Contents for F 700 GS 2012

Reviews:

Brands by name

Popular brands

BMW F 700 GS 2012, Rider'S Manual

Search results

Summary of Contents for F 700 GS 2012

Reviews:

Brands by name

Popular brands