BMW C 650 Sport Page 51 Rider'S Manual Download

Page: 51 / 170

Briefly press TRIP

repeatedly

until

SETUP

is displayed.

Press and hold TRIP

to start

SETUP

The dividing line

is hidden.

SETUP CLOCK

is displayed.

Press and hold INFO

to set

the hours.
Hours

flash.

Briefly press TRIP

to in-

crease hours.
Briefly press INFO

to reduce

hours.
When the hours have been
set as desired, press and hold
INFO

Minutes

flash.

Briefly press TRIP

to in-

crease minutes.
Briefly press INFO

to reduce

minutes.

When the minutes have been
set as desired, press and hold
INFO

The minutes

no longer flash.

Check the setting on the time
display

The clock is now set.
Press and hold TRIP

The on-board computer is dis-
played.

Set date

The Maxi-Scooter is stationary.

Switch on the ignition.
The onboard computer is dis-
played.
Selecting the SETUP (

47).

Operation

Summary of Contents for C 650 Sport











































































































































































Search results

Summary of Contents for C 650 Sport

Reviews:

Related manuals for C 650 Sport

Brands by name

Popular brands

BMW C 650 Sport, Rider'S Manual

Search results

Summary of Contents for C 650 Sport

Reviews:

Related manuals for C 650 Sport

Brands by name

Popular brands