BMW C 650 Sport, Rider'S Manual

Page: 108 / 170

Remove light source from
socket.
Replace defective light source.
Bulb for license-plate
light
W5W / 12 V / 5 W
To protect glass on new bulb
against contamination, always
use a clean, dry cloth to hold it;
do not touch with bare fingers.
Insert bulb in socket.
Insert socket 1 in light housing.
Jump-starting
ATTENTION
Current too strong when
jump-starting the Maxi-
Scooter
Cable fire or damage to the vehi-
cle electronics
Jump start the Maxi-Scooter
exclusively using the battery
terminals, not the power
socket.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle.
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
8
106
z Maintenance