BMW C 400 X Rider'S Manual Download Page 159

Page: 159 / 245

Fuses

Removing the fuse

Requirement

The fuses are located under the
battery compartment cover by
the leg shield.

ATTENTION

Bypassing defective fuses

Risk of short circuit and fire

Do not bypass defective fuses.
Replace defective fuses with
new fuses.
Turn off ignition.
Remove battery cover (

166).

To remove the main fuse, pull
fuse

out of the fuse holder.

To remove the fuses of slots
2 to 7, press the locks

and

remove the lid

from the fuse

box.

Pull the affected fuse out of
the fuse box.

Installing fuse

Replace the faulty fuses in the
fuse box with a fuse with the
required current level.

157

Maintenance

https://www.motorcycle-manual.com/

Summary of Contents for C 400 X






















































































































































































































































Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands

BMW C 400 X, Rider'S Manual

Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands