manualshive.com logo in svg

BMW BMW M2 COMPETITION, Owner'S Manual

Share
Download
BMW BMW M2 COMPETITION Owner'S Manual Download Page 160

DSC OFF and the DSC OFF indicator light go
out.

Indicator/warning lights

When DSC is deactivated, DSC OFF is displayed
in the instrument cluster.

The indicator light lights up: DSC is de‐
activated.

M Dynamic Mode MDM

Concept

M Dynamic Mode makes it possible to drive on a
dry roadway with high longitudinal and transverse
acceleration but with limited vehicle stability.
Only in the absolute limit area does the system
intervene for stabilization by reducing the engine
power and by braking interventions on the
wheels. In this driving condition, additional steer‐
ing corrections may be necessary.
You may find it useful to briefly activate MDM
under the following special circumstances:

▷

When driving in slush or on uncleared, snow-
covered roads.

▷

When freeing vehicle from deep snow or driv‐
ing off from loose ground.

▷

When driving with snow chains.

Safety information

Warning

When M Dynamic Mode is activated, stabilizing
interventions are carried out only to a reduced
extent. There may be a risk of accident or risk
of damage to property. Adjust driving style to
traffic conditions. Watch traffic closely and ac‐
tively intervene where appropriate. Do not jerk
the steering wheel in response to a warning.

To increase vehicle stability, activate DSC again
as soon as possible.

Activating MDM

Press the button briefly.
The MDM and DSC OFF symbols in the

instrument cluster light up.

Deactivating MDM

Press the button.
The MDM and DSC OFF symbols go out.

Via iDrive

1.

"My Vehicle"

2.

"M Drive 1" or "M Drive 2"

3.

"DSC"

4.

"MDM"

To open M Drive with the selected settings,
press the corresponding button on the steering
wheel:

▷

▷

A message appears in the instrument cluster.
This message is confirmed by pressing the but‐
ton again.

Deactivating MDM

Press the appropriate button 1 or button 2 on
the steering wheel again.
M Dynamic Mode and the settings selected un‐
der M Drive are deactivated.

Seite 160

CONTROLS

Driving stability control systems

160

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands