BMW 84 64 0 153 493 Installation Instructions Manual Download Page 1

 

Retrofit kit No. 84 64 0 153 493
Installation Instructions No. 01 29 0 153 674

Issue date: 09.2002

 

Universal BMW Hands-Free Kit Upgrade

 

BMW X5 (E

 

 

 

53) from 09/01 to 03/02

 

These installation instructions are only valid for cars with SA 640 (telephone preparation).

Important information

 

This upgrade kit is for use within the BMW dealership organisation only.

Subject to technical modifications.

 

Target group

 

The target group for these installation instructions is specialist personnel trained on BMW cars with the 
appropriate specialist knowledge.

All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and 
work instructions in a rational order using the prescribed tools (special tools) and observing current health and 
safety regulations.

 

Installation information

 

Ensure that the cables/lines are not kinked or damaged as you install them in the car.

The installed cables are to be secured with cable ties.

If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.

 

Ordering instructions

 

The snap-in adapter is not part of the upgrade kit and must be ordered separately.

 

Installation time

 

Approx. 4 hours, but this may vary depending on the condition of the car and the equipment in it.

 

Pictograms

 

denotes instructions that draw your attention to special features

 

.

 

 

denotes the end of the instruction or caution text.

 

Retrofit kit No.

 

84 64 0 153 493

84 64 0 302 178

 

Special tools required

 

Removal tool (00 9 341)

 

Parts and Accessories
Installation Instructions

Summary of Contents for 84 64 0 153 493















Reviews: