BMW 8 Coupe Series Owner'S Handbook Manual Download Page 130

Page: 130 / 390

Displays in the instrument cluster

General

The display in the revolution
counter indicates that the Auto
Start Stop function is ready for
automatically starting the engine.

The display indicates that the pre‐
conditions for an automatic en‐
gine stop are not met.

Total time for switched-off engine

ECO PRO, see page

296

, drive

mode: depending on the equip‐
ment, the total time during which
the engine is shut down by the
Auto Start Stop function is dis‐

played during an automatic engine stop.
After refuelling, the total time is automatically re‐
set.

Functional limitations

The engine is not shut down automatically in the
following situations:

▷

On steep downward gradients.

▷

Brake not pressed strongly enough.

▷

High outside temperature and operation of
the automatic air conditioning.

▷

Interior not heated or cooled to the desired
temperature.

▷

Where there is a risk of condensation when
the automatic air conditioning is switched on.

▷

Engine or other parts not at operating tem‐
perature.

▷

Engine cooling is required.

▷

Sharp steering angle or steering operation.

▷

Vehicle battery is heavily discharged.

▷

At high altitudes.

▷

Bonnet is unlocked.

▷

Park Assistant is activated.

▷

Stop-and-go traffic.

▷

Selector lever position in N or R.

▷

After reversing.

▷

Use of fuel with high ethanol content.

Engine start

Operating requirements

Steptronic transmission

For driving off, the engine automatically starts
under the following conditions:

▷

By releasing the brake pedal.

▷

With Automatic Hold activated: press the ac‐
celerator pedal.

Driving off

After starting the engine, accelerate as normal.

Safety function

After an automatic shut down, the engine will not
restart automatically, if one of the following con‐
ditions is met:

▷

Driver's seat belt unbuckled and driver's door
open.

▷

Bonnet has been unlocked.

Several indicator lamps illuminate for various
lengths of time.
The engine can only be started using the start/
stop button.

System limits

Even if you do not want to drive off, the engine
restarts automatically in the following situations:

▷

Very high temperature in the interior when
the cooling function is switched on.

▷

Very low temperature in the interior when the
heating is switched on.

Seite 130

CONTROLS

Driving

130

Online Edition for Part no. xxx - VI/18

Summary of Contents for 8 Coupe Series







































































































































































































































































































































































































Search results

Summary of Contents for 8 Coupe Series

Reviews:

Related manuals for 8 Coupe Series

Brands by name

Popular brands

BMW 8 Coupe Series, Owner'S Handbook Manual

Search results

Summary of Contents for 8 Coupe Series

Reviews:

Related manuals for 8 Coupe Series

Brands by name

Popular brands