5.
Select desired seat.
6.
Press the Controller and turn it to set the seat
heating distribution.
Active seat ventilation
Concept
Integrated fans in the seat and armrest areas
provide a comfortable seat temperature.
Overview
Active seat ventilation
Switching on
Press the button once for each ventila‐
tion level.
The maximum temperature is reached when
three LEDs are lit.
The ventilation switches back by one level after a
short time.
Switching off
Press and hold the button, until the
LEDs go out.
Climate control rules
Concept
A number of heating and cooling functions can
be automatically activated depending on the ex‐
ternal temperature.
General information
The external temperature at which the functions
are to be automatically activated can be set via
iDrive.
Activation is performed if the external tempera‐
ture exceeds or falls below the set temperature
in the first few minutes after drive-ready state
has been switched on. A new alignment is car‐
ried out after the settings have been changed.
Depending on the equipment package, the fol‐
lowing functions can be automatically activated:
▷
Seat heating.
▷
Heated steering wheel.
▷
Seat ventilation.
If the trip is continued within approx. 15 minutes
after a stop, the functions are activated automati‐
cally with the levels that were last selected.
Functional requirement
▷
The safety belt of the driver's seat is buckled.
▷
Drive-ready state is switched on.
Activating/deactivating
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Climate control rules"
5.
Select the desired functions.
6.
Activate the desired rule.
7.
Set the level.
Seite 121
Seats, mirrors and steering wheel
CONTROLS
121
Online Edition for Part no. 01405A11338 - VI/20
