
Opening and
closing
38
Opening, closing
Coupe
>
Press the switch to the resistance point:
The window opens as long as you press the
switch.
>
Press the switch beyond the resistance
point:
The window opens automatically. Press the
switch again to stop the opening move-
ment.
You can close the windows in the same manner
by pulling the switch.
Convertible: individually
>
Press the switch to the resistance point:
The window opens as long as you press the
switch.
>
Press the switch beyond the resistance
point:
The window opens automatically. Press the
switch again to stop the opening move-
ment.
You can close the windows in the same manner
by pulling the switch. The rear windows do not
close automatically.
Convertible: jointly
>
Press the switch to the resistance point:
All windows open as long as you press the
switch.
>
Press the switch beyond the resistance
point:
All windows open automatically. Press the
switch again to stop the opening move-
ment.
>
Pull the switch:
All windows close as long as you pull the
switch.
After switching off the ignition
When the remote control is removed or the igni-
tion is switched off, you can still operate the
windows for approx. 1 minute as long as no
door is opened.
For information on convenient operation via the
remote control or the door lock, refer to page
. For information on closing with conve-
nient access, refer to Locking on page
Pinch protection system
If the closing force exceeds a specific value as a
window closes, the closing action is interrupted
and the window reopens slightly.
Despite the pinch protection system
check and clear the window's travel path
prior to closing it, otherwise the safety system
might fail to detect certain kinds of obstruc-
tions, such as thin objects, and the window
would continue closing.
Do not install any accessories that might inter-
fere with window movement. Otherwise the
pinch protection system could be impaired.
<
ba8_E9293_US.book Seite 38 Montag, 6. November 2006 1:48 13
Online Edition for Part no. 01 41 0 013 015 - © 11/06 BMW AG