Under t
h
e
ho
od
218
Checking coolant level
1.
The engine must be at ambient tempera-
ture.
2.
Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated
pressure to escape, then continue turning
to open.
3.
The coolant level is correct if it is between
the maximum and minimum marks in the
filler neck, refer also to the diagram next to
the filler neck.
4.
If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
5.
Turn the cap until there is an audible click.
6.
Have the reason for the coolant loss elimi-
nated as soon as possible.
ba8_E9293_US.book Seite 218 Montag, 6. November 2006 1:48 13
Online Edition for Part no. 01 41 0 013 015 - © 11/06 BMW AG