BMW 318D, Owner'S Handbook Manual

Page: 269 / 430

▷ With a door open.
▷ With the boot lid open.
▷ With the exterior mirrors folded in.
Grey hatched areas with a symbol, for example
an open door, in the camera display identify
areas that are not currently shown.
System limits
Non-visible areas
Due to the angle of view, the area under the ve‐
hicle cannot be seen by the cameras.
Detection of objects
Very low obstacles and higher, protruding ob‐
jects such as ledges cannot be detected by the
system.
Some assistance functions also take account of
Park Distance Control PDC data.
Observe the notes in the chapter on Park Dis‐
tance Control PDC, see page
255 .
The objects shown in the Control Display may be
closer than they appear. Do not estimate the dis‐
tance to objects based on the display.
Malfunction
The failure of a camera is shown on the Control
Display.
A yellow symbol is shown and the cap‐
ture area of the failed camera is shown in
black on the Control Display.
Remote 3D View
Principle
With the corresponding equipment, the BMW
Connected App and the camera images from
Surround View can be used to show the areas
around the vehicle on a mobile device, for exam‐
ple a smartphone.
The function shows a view of the current situa‐
tion.
Operating requirements
▷ Data transfer must be activated, see page 73 .
▷ The BMW Connected App must be installed
on the mobile device.
Switching the function on/off
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Configure services"
6. "BMW ConnectedDrive"
7. "Remote 3D View"
Functional limitations
The system may have limited functionality or
may not be available at all in the following situa‐
tions, for example:
▷ In poor light conditions.
▷ If the cameras are dirty.
▷ With a door or the boot lid open. Dark areas in
the display indicate areas that are not detec‐
ted by the system.
▷ With the exterior mirrors folded in.
▷ When other camera functions are run in the
vehicle.
▷ If the vehicle is moving faster than at walking
speed.
▷ It may not be possible to use the function in
all countries.
▷ For reasons related to data protection, the
function can only be run three times in two
hours.
Seite 269
Driver Assistance Systems
CONTROLS
269
Online Edition for Part no. xxx - VI/19