BMW 318D, Owner'S Handbook Manual

Page: 132 / 430

Position
Symbol Meaning
The corresponding symbol
shows the brackets for the lower
ISOFIX anchors.
The brackets for the lower ISOFIX anchors are
located behind the marked covers.
Before fitting ISOFIX child
restraints
Pull the seat belt away from the area of the child
seat mountings.
Fitting ISOFIX child restraint
systems
1. Install the child restraint system, see the
manufacturer's instructions.
2. Make sure that both ISOFIX anchors are
locked correctly in place.
i-Size child restraint systems
General
i-Size is a regulation for child restraint systems,
which is used for the approval of child restraint
systems.
Symbol Meaning
If this symbol is seen in the vehi‐
cle, the vehicle has been ap‐
proved in accordance with i-
Size. The symbol shows the
mounts for the system's lower
anchors.
The corresponding symbol
shows the mounting point for
the upper retaining strap.
Mounts for the upper
ISOFIX retaining strap
Safety notes
WARNING
If the upper retaining strap is used incorrectly
with the child restraint system, the protective
effect may be reduced. There is a danger of in‐
jury. Make sure that the upper retaining strap is
not twisted and is not routed to the upper
mounting point over sharp edges.
WARNING
If the rear backrest is not locked, the protective
effect of the child restraint system is limited or
non-existing. The rear backrest can fold for‐
ward in certain situations, for example braking
manoeuvre or accident. There is a danger of in‐
jury or even death. Make sure that the rear
backrests are locked.
Seite 132
CONTROLS
Carrying children safely
132
Online Edition for Part no. xxx - VI/19