BMW 2011 R 1200 GS, Rider'S Manual, Page: 124 / 167

Cylinders not synchronised.
Make sure the throttle-valve
cable is correctly routed.
Check that the throttle-valve
cable is seated in guide
4 of
the intake and that the throttle
valve is seated against the
stop.
Seat the fuel-tank cover
in holder
7 and install two
screws 6 .
Press the side cover at 4
and 5 to engage it in the
holders.
Install screw
3 .
Hold the cover in position and
install short screws
2 and long
screw 1 .
Install the front seat ( 63).
Jump starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
8
122
z Maintenance
ProCarManuals.com