BMW 2009 M5 Owner'S Manual Download Page 197

Page: 197 / 266

195

directly through the BMW Assist concierge ser-
vice.
The concierge service must be enabled sepa-
rately by the BMW Assist Response Center.

Calling up information

Press the

button.

This opens the start menu.

Move the controller forward to select
"Communication".

Change to upper field if necessary. Turn the
controller until "BMW Assist" is selected
and press the controller.

Select "Concierge" and press the control-
ler.

Select "Start service" and press the con-
troller.

The BMW Assist Response Center will connect
you with a BMW Assist concierge.

Displaying transmitted data

Select the received message if necessary and
press the controller.

Dialing a phone number or transferring

an address for destination guidance

Select "Options" and press the controller.

Select a menu item:

Press "Call" to make a telephone call. A pre-
requisite for this is that your Bluetooth
mobile phone has been paired with the
vehicle.

Press "Select as destination" to transfer the
address to the navigation system for desti-
nation guidance.

BMW Assist My Info*

Using the BMW Assist Internet portal, you can
transmit addresses and phone numbers into
the vehicle using text messages.

Press the

button.

This opens the start menu.

Move the controller forward to select
"Communication".

Change to upper field if necessary.
Select "BMW Assist" and press the control-
ler.

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

Summary of Contents for 2009 M5











































































































































































































































































Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands

BMW 2009 M5, Owner'S Manual

Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands